Barcol Air Chilled Ceiling


Comfort – Radiated cooling is perceived to be more comfortable and the possibility of cold drafts is practically eliminated due to only a small amount of air being required for ventilation and humidity control.

Energy savings – The system uses relatively high chilled water temperatures resulting in large savings in running costs of the chillers. There are also big savings in fan energy to move air around the building because the system does not rely on air for heat exchange and therefore little air is required.
Catalogue

Barcol Air Active Chilled Beam - Airfit 300 Series


Barcol-Air's AIRFIT 2 300 series active chilled beams units are designed with a nominal width of 300 mm to integrate with the ceiling grids of the more popular ceiling configurations. Standard unit lengths are nominally 1,200 mm to 3,000 mm in 300 mm increments but special lengths are also available to match with specific ceiling requirements.
Catalogue

Barcol Air Active Chilled Beam - Airfit 600 Series


Barcol-Air's AIRFIT 2 600 series active chilled beams units are designed with a nominal width of 600 mm to integrate with the ceiling grids of the more popular ceiling configurations. Standard unit lengths are nominally 1,200 mm to 3,000 mm in 300 mm increments but special lengths are also available to match with specific ceiling requirements.
Catalogue

Barcol Air Active Chilled Beam - Airfit Vertical Series


The AIRFIT V series is suitable for application both in the perimeter zones of a building to offset the facade glazing heat loads and also in the interior zones to offset internal heat loads. When used at the perimeter of the building the air discharge is usually configured to be downwards adjacent to the perimeter glazing in order to offset the heat load from the glass façade.
Catalogue

Barcol Air Active Chilled Beam - Airfit Horizontal Series


The AIRFIT H series is configured to match the air distribution requirements for hotel rooms, individual hospital rooms and offices. Its compact size is designed for installation in the ceiling above the entrance to the room with a horizontal air discharge to maximize the air throw across the room using the Coanda effect to attach the air to the ceiling.
Catalogue

Barcol Air Active Chilled Beam - Airfit High Flow Series



The Airfit HF is designed specifically for those areas that require a higher ventilation rate than can normally be provided by active chilled beams. This allows the chilled beam system to be used through a building including in high occupancy areas such as meeting and conference rooms where high ventilation airflows are required.
Catalogue

Barcol Air Active Chilled Beam - Klima 600 Series



Barcol-Air's KLIMA 2 600 series active chilled beams units are designed with a nominal width of 600 mm to integrate with the ceiling grids of the more popular ceiling configurations. Standard unit lengths are nominally 1,200 mm to 3,000 mm in 300 mm increments but special lengths are also available to match with specific ceiling requirements.
Catalogue

Barcol Air Passive Chilled Beam - Airfit P Series



The principle of the passive chilled beam system is to use terminal chilled water heat exchangers in the ceiling to offset the room sensible cooling loads. The ventilation and humidity control requirements are taken care of using a separate system of primary conditioned air supplied by a central air handling unit.
Catalogue

Connect Us

Click SUBMIT button to leave your message
SUBMIT